logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
LUCI
LED STRIP
INDOOR LIGHTING
LNLY-1011-L30-DF-I-10

Updated with low wattage high lumen LED series

Available in 4 different wattage variations Customizable every 100mm increment up to 1.4m 5.5mm width homogeneous rigid light Ideal for recessed linear light for wall, ceiling and furniture Available for magnet installation

Compare
LUCE & LIGHT
UNDERWATER LIGHT
OUTDOOR LIGHTING
MY10005LI 10W 59D


Compare
XAL
RECESSED DOWNLIGHT
INDOOR LIGHTING
048-2820411S 048-2896317 002-90744
Round recessed spotlight in die-cast aluminium; surface black; 360° rotatable and 30° tiltable; installation without tools in mounting set due to patented ball catch system; round installation housing; with trim traffic white; suitable for ceiling thickness of 2-25 mm; passive cooling of the LEDs through improved heat sink geometry; with COB (Chip on Board) technology for maximum efficiency; no appearance of multiple shadows; light colour 2700 K; binning initial MacAdam ≤ 3 SDCM; CRI ≥ 90; min. 85% of luminous flux after 50000 operating hours; energy efficient LEDs with high CRI; incl. high quality lens system; precise radiation characteristic with 15° beam; degree of protection from below IP40 (from above IP20); PC2 220-240V; incl. converter, non dimmable; light source replaceable by an authorized professional; control gear replaceable by an authorized professional;
Compare
UNIOS
RECESSED DOWNLIGHT
INDOOR LIGHTING
TITANIUM G2 L_TITA0100.GD27.PH-UN.DAR020.0350.01

Meet the iconic Titanium G2. High-performing with a deep recessed design, the downlight series is low-glare with a UGR rating of <16. With a CRI97+ variation, a wide range of mounting options, and optical accessories, the Titanium G2 is the perfect solution for general lighting needs in commercial and residential projects. The ingress protection degree is IP44.

Compare
SIMES
INGROUND LINEAR LIGHT
OUTDOOR LIGHTING
S.5495W.19
Minilinear: "Copper Free" Aluminium extruded EN AW-6060 with high resistance against corrosion, caps in "Copper Free" Aluminium die cast housing in EN AB-44100 with high resistance against corrosion. Miniround: "Copper Free" Aluminium die cast housing in EN AB-44100 with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets (Minilinear). Painting Process : 3 Step Process 1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09 Maximum load capacity 500 Kg. This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user. This product contains a light source of energy efficiency class: E. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.
Compare
IGUZZINI
SPOTLIGHT
OUTDOOR LIGHTING
PALCO INOUT_Q692 .04 BLACK

Outdoor floodlight designed to use LED lamps and a spot optic. Consists of an optical assembly and a base. The optical assembly, arm and base are made of aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather resistance.

Compare
NEKO
LINEAR DOWNLIGHT
INDOOR LIGHTING
FA10-9304022A-WS_FUSION FA10

Square recessed ceiling downlight made of die-cast aluminium with white powder-coating finish (RAL 9016) and specular reflector; 1-10V Dim Driver; LED 22W; measurement 309mm x 70mm;…

Compare
SIMES
WALL LIGHT
OUTDOOR LIGHTING
LIFT SQUARE (S.5075W)

MATERIAL CHARACTERISTICS

Aluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process: 3 Step Process

LIGHTING PERFORMANCE

Reflector in polymers covered with 99.98% pure aluminium. Luminaires come with toughened glass lenses already installed and are aff

Compare
PROLICHT
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
220-0256

The recessed spot MECHANIQ SQUARE EFFICIENCY DOUBLE from the familiy MECHANIQ consists of aluminum-die-cast. With 3 powder coated options 15625 colour combinations can be achieved. Stated photometric values correspond to operation by 500 mA; a suitable ballast needs to be sourced separately and is not scope of delivery. Dimming (# 220-0256) depends on the used ballast and may vary. The spot with direct illumination corresponds to protection class SK3 at IP20. Multiple applications possible due to comprehensive adjustment options. Rotability is 355° and additionally MECHANIQ SQUARE EFFICIENCY DOUBLE is tiltable by 45°. A PROLICHT lense pack is optionally available.

Compare
FLOS
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
05.7210.74

Recessed luminaire with LED light source. Power supply not included. Installation frame not necessary.

Compare
HUNZA
SPOTLIGHT
OUTDOOR LIGHTING
WS/HPRGBW_40D

The Wall Spot High Power has been designed for the bold. Create your dynamic colour statement in a convenient and sleek wall mounted package .This luminaire has a fully adjustable head allowing 360 degree rotation and 0 - 90 degree elevation. All Hunza High Power products have an extra powder coat layer to ensure maximum corrosion protection.

Each unit comes with its own remote mounted DMX driver.


Compare
FLOS
MAGNETIC TRACKLIGHT
INDOOR LIGHTING
LIGHT SHADOW OPTIC FLOOD_05.1826.14A

LED lighting module, with 4 spotlights and low glare, to be installed in the The Running Magnet system. DC/DC, built-in electronic current converter.

Compare
BEGA
BOLLARD
OUTDOOR LIGHTING
88 060 K3
Shielded bollards made of stainless steel with rotationally symmetrical wide beam light distribution. A group of bollards whose construction is determined by the material stainless steel. The enormous stability and durability of this material meet the highest standards. For the illumination of footpaths, entrance areas and driveways. For private and public areas.
Compare
XAL
CEILING LIGHT
OUTDOOR LIGHTING
SONO LOOP 600_871-81565170
Round luminaire housing in die-cast aluminium; surface powder coated; fitted bezel in rolled, seamless welded aluminium profile; suitable for wall or ceiling mounting; completely homogeneously illuminated, satinised PMMA cover; same luminance for all size versions; energy-efficient LEDs with very good colour rendering; luminaire with 2 cable openings and plug-in terminals for through wiring. IP54, IK07 DIMENSION : D600MM * H80MM
Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
90647W60
Single emission downlights for indoor application. The warm white LED light source with a medium wide flood light distribution is composed of 1 powerled LEDs. The device body is made of aluminium 6026 and features a embossed black ral 9005 finish, processed by means of powder coating; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP44; the total weight is of 0.078 kg. The power supply driver is notprovided and is to be ordered separately. The power supply cable is included and features a 0.170 m length. The device features protection class III and can be ceiling-mounted, with a 29 mm diameter hole (in plasterboard) with an outer casing, code 99847 (for concrete or masonry). Compliant with the EN 60598-1 standard and its specific provisions
Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
Lighting Design Without Borders: Professional Tools for Every Device
Feb 11, 2026
Lighting Design Without Borders: Professional Tools for Every Device