logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
LUCI
LED LIGHT BAR
INDOOR LIGHTING
LNL-0498-L30-DF-I
Dotless and three-sided light emission from the front side and the side surfaces expands design possibilities in terms of exhibiting the light source. The smart form allows a unique line lighting to materialize for fixtures, handrails and backs of mirrors etc.
Compare
MARTIN
CONTROL SYSTEM
INDOOR LIGHTING
DMX/RDM 6 Way SPLITTER

The Martin DMX/RDM 6 Way Splitter is the perfect companion to any controller or DMX/RDM device. The main purpose of the Martin DMX/RDM Splitter is to maintain proper data over long or several runs of DMX signal. The Splitter boosts the weak DMX signal to its original output level before it becomes too low to be read by DMX devices. Disruption of DMX is often caused by bad cables or bad connections. The Martin DMX/RDM 6 Way Splitter will help to rectify the signal.

Compare
LINEALIGHT
WALLWASHER
OUTDOOR LIGHTING
96197W15
Single emission lines for outdoor application. The warm white LED light source with a flood light distribution is composed of 12 powerled LEDs. The device body is made of uv resistant polycarbonate and features a transparent finish; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP67; the total weight is of 0.89 kg. The power supply cable is included and features a 0.25 m length. The device features protection class II and can be wall lights, ceiling or floor-mounted with an outer casing, code 98844 (for concrete or masonry). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
PHOS
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
EY-MTSQ2A-BT/B1/WT/-STD4-30-90-30-350

The Eyeconic Twin Mini Trim Square Adjustable is a recessed, directional downlight with a 62x124mm bezel and features a beautifully sculpted anti-glare baffle. 

Compare
SPARK
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SPK0622-24W-55D

Recessed adjustable downlight come with snoot, luminaire body made of aluminium housing with white powder coated finish. Black finish and Honeycomb accessory available upon request.

Compare
LINEALIGHT
SPIKE LIGHT
OUTDOOR LIGHTING
SHAKER_76183W30
Single emission projectors for outdoor application. The warm white LED light source with a flood light distribution is composed of 1 arrayled LEDs with CCT of 3000 K and a CRI 80; the source luminous flux is 1267 lm, with a 110.2 lm/W nominal luminous efficacy. The device body is made of die-cast aluminium en ab - 46100 and features a embossed black ral 9005 finish, processed by means of open pore anodizing + powder coating; the diffuser is made of extra clear glass - tempered. The ingress protection degree is IP66.
Compare
COLORS
LED NEON TUBE
OUTDOOR LIGHTING
NNR18_3000K-14.4W

The luminaire is made of high light transmittance, food-grade environmental silicone material, integrated extrusion molding technology, High protection level. Unique optical light distribution structure design, uniform lighting surface and no shadow. Compared with the traditional neon tube or PVC guardrail tube, the silicone material has good flexibility, the simple and stylish appearance, which is exquisite and unique. Resistance to saline solutions, acids & alkali, corrosive gases and UV.

Compare
LINEALIGHT
CEILING LIGHT
INDOOR LIGHTING
64749W60
Single emission ceiling lights for indoor application. The warm white LED light source with a extra wide flood light distribution is composed of 1 arrayled LEDs. The device body is made of aluminium 6060 and features a embossed white ral 9003 finish, processed by means of powder coating The device body is made of aluminium 6060 and features a 5g 9005 black finish, processed by means of powder coating; the diffuser is made of extra clear glass. The ingress protection degree is IP40; the total weight is of 0.50 kg. The device features protection class I and can be ceiling-mounted. Compliant with the EN 60598-1 standard and its specific provisions.
Compare
FLOS
RECESSED DOWNLIGHT
INDOOR LIGHTING
05.7447.74

Recessed luminaire with LED light source. Power supply not included. Installation frame not necessary. IP54.

Compare
LINEALIGHT
FLOODLIGHT
OUTDOOR LIGHTING
Periskop 95346M30

Single emission projectors for outdoor application. The super warm LED light source with a medium flood light distribution is composed of 1 arrayled LEDs with CCT of 2700 K and a CRI 80; the source luminous flux is 770 lm, with a 128.3 lm/W nominal luminous efficacy. The device body is made of die-cast aluminium en ab - 46100 and features a embossed white ral 9003 finish, processed by means of open pore anodizing + powder coating; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The ingress protection degree is IP66; the total weight is of 0.85 kg. The total absorbed power is 8 W. The power supply cable is included and features a 1 m length. The device features protection class I and can be wall lights, ceiling or floor-mounted. Compliant with the EN 60598-1 standard and its specific provisions.

Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
80245W60
Single emission downlights for indoor application. The warm white LED light source with a wide flood light distribution is composed of 1 arrayled LEDs. The device body is made of die-cast aluminium en ab - 46100 and features a embossed black ral 9005 finish, processed by means of powder coating. The ingress protection degree is IP40; the total weight is of 0.120 kg. The power supply driver is not provided and is to be ordered separately. The total absorbed power is 6.5 W. The power supply cable is included and features a 0.15 m length. The device features protection class III and can be ceiling-mounted, with a 48 mm diameter hole (in plasterboard) with an outer casing, code 89374(for concrete or masonry). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
SPARK
RECESSED DOWNLIGHT
INDOOR LIGHTING
SPK8240-T1-25W-40°

Recessed fixed downlight made of aluminium housing with white powder coated finish. Inner reflector available in mirror chrome, white and black color. Cut-out Ø150mm. For indoor use. IP20.

Compare
VIBIA
SUSPENDED PENDANT LIGHT
INDOOR LIGHTING
MATCH 0003

Match is much more than a light fixture. This innovative product stands as a new lighting concept based onco-creation. Using the product configuration software CREA, Match allows you to create structures arranged chaotically, automatically planned on-line and adapted to fit into the room and the space available. The result are infinite artistic configurations based on thin rods of aluminum and LED light terminals, forming a light sculpture that illuminates central themes of space.

Compare
MEYER
POLE LIGHT
OUTDOOR LIGHTING
8 903 246 099

Monospot pole luminaires in sizes 3 and 4 can be equipped with a Zhaga 18 connection socket. To this standardised interface, communication nodes for wireless control and monitoring are connected. Switch-on and switch-off times can be scheduled and light levels can be controlled flexibly via remote access. In addition, the status of each luminaire is monitored in real-time. Operators of public lighting systems benefit from efficient and cost-effective maintenance. The luminaires have integral DALI drivers with D4i standard.

Compare
LINEALIGHT
WALLWASHER
OUTDOOR LIGHTING
97256W08
Single emission lines for outdoor application. The warm white LED light source with a spot light distribution is composed of 12 powerled LEDs. The device body is made of uv resistant polycarbonate and features a transparent finish; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP67; the total weight is of 0.39 kg. The power supply cable is included and features a 0.25 m length. The device features protection class II and can be wall lights, ceiling or floor-mounted with an outer casing, code 98843 (for concrete or masonry). Compliant with the EN 60598-1 standard and its specific provisions.
Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset