logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
NEKO
RECESSED DOWNLIGHT
INDOOR LIGHTING
M3-9302511F-TA8-WWW
Round spotlight for recessed installation made of die-cast aluminium with white powder-coating finish (RAL 9016) and white reflector; ON-OFF Driver; LED 11W; measurement Ø85mm; ceiling cutout of Ø75mm with a narrow mounting trim; luminaire's weight is approximately 200g; rotation 355° and pivot max. 18°; CCT 3000K with an LED Output of 1100lm; high color rendering at an index of CRI90; after a lifetime of 50000h min. 80% of the luminous flux with energy efficient CITIZEN LED Chips; 5 years warranty; lighting perfectly suitable for reading, writing as well as computer and control work according to DIN EN 12464-1 (UGR<19); degree of housing protection IP20 (LED Module IP54)
Compare
IGUZZINI
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
Laser adjustable_P356.43


Compare
IGUZZINI
SPOTLIGHT
INDOOR LIGHTING
BJ95 .04

Direct light outdoor floodlight, designed to use warm white LED lamps, with spot optic. Ground, wall or ceiling installation using special adjustable bracket. The luminaire consists of an optical assembly, rear cap and adjustable bracket. The optical assembly and rear cap are made of die-cast aluminium alloy coated with liquid acrylic paint (grey finish) or textured liquid (white finish) with a high level of resistance to weather and UV rays.The electronic ballast must be ordered separately.

Compare
WEVER & DUCRE
SURFACE MOUNTED LIGHT
INDOOR LIGHTING
SQUBE 1.0 LED_144268B3
Ceiling surface spotlight made from die-cast aluminium; surface Black Matt; powder coated, matt texture. 220 - 240 V; beam angle 39°; 90° tiltable; degree of protection IP20.
Compare
NEKO
RECESSED DOWNLIGHT
INDOOR LIGHTING
FF2-9302404F-WB
Square recessed ceiling downlight made of die-cast aluminium with white powder-coating finish (RAL 9016) and black reflector; ON-OFF Driver; LED 4W; measurement 70mm x 45mm; ceiling cutout of 62mm x 37mm with a narrow mounting trim; luminaire's weight is approximately 120g; CCT 3000K with an LED Output of 420lm; high color rendering at an index of CRI90; after a lifetime of 50000h min. 80% of the luminous flux with energy efficient OSRAM LED Chips; 5 years warranty; lighting perfectly suitable for reading, writing as well as computer and control work according to DIN EN 12464-1 (UGR<10); degree of housing protection according to DIN EN 60529 (IP20)
Compare
SPARK
RECESSED DOWNLIGHT
INDOOR LIGHTING
SPK1111-8W-55D

Recessed pin-hole downlight made of aluminium housing with white powder coated finish. Black finish available upon request. Luminaire come with 2 different sizes, 6-8W in Ø63mm and 8-15W in Ø90mm.

Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
MODOC_ RF_C00694WHWML-31°
Single emission recessed downlights for indoor application. The warm white LED light source with a medium flood light distribution is composed of 1 arrayled LEDs. The luminaire body is made of technopolymer and features a white finish; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP20.
Compare
ELR
RECESSED DOWNLIGHT
INDOOR LIGHTING
VASARI 3 35PRO


Compare
SPARK
TRACKLIGHT
INDOOR LIGHTING
SPK7913-T1_3000K-25W-24°
Surface mount track spotlight made of die cast aluminium housing and come with different diameter such as Ø55, Ø65, Ø70 and Ø75mm. Wattage from low 6W to 35W max. Fixture finishing available in Black or White color. Wide bean angles are avaiable. IP20
Compare
SPARK
RECESSED DOWNLIGHT
INDOOR LIGHTING
SPK2613-60W-15D

Recessed fixed triple downlight, luminaire body made of aluminium housing with white powder coated trim finish. Reflector come with Chrome black, White and Silver finish. Honeycomb accessory available upon request.

Compare
SPARK
SUSPENDED LINEAR LIGHT
INDOOR LIGHTING
S-LINE-CFLS-1550-ONOFF

A continuous-row LED lighting system created by trunking unit and LED luminaire. It appears a consistent continuous-row system, without any visual interruption or different reflectors. The luminaire and trunking rail are perfectly matched to each other. Optics available 30°, 60°, 90°, 120°, Asymmetrical, Double asymmetrical and Diffuser.

Compare
SPARK
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SPK2621-25W-24D

Recessed adjustable square downlight, luminaire body made of aluminium housing with white powder coated finish. Black finish and Honeycomb accessory available upon request.

Compare
PLATEK
INGROUND UPLIGHT
OUTDOOR LIGHTING
TETRA 36 IN-GROUND 8412618

In-ground luminaire made of aluminium alloy body. Locking flange in AISI 316L stainless steel. A4 Stainless steel screws. Subjected to galvanic anodizing treatment divided into distinct phases: mechanical satin finishing, surface degreasing, anodic oxidation and final sealing. Installation of the recessed housing is cast concrete with a 20-30cm gravel soakaway. IP67, IK10

Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
85045W30
Single emission downlights for indoor application. The warm white LED light source with a medium wide flood light distribution is composed of 1 powerled LEDs. The device body is made of brass and features a chrome finish, processed by means of electroplating. The ingress protection degree is IP44; the total weight is of 0.06 kg. The power supply driver is not provided and is to be ordered separately. The power supply cable is included and features a 0.12 m length. The device features protection class III and can be wall lights or ceilingmounted, with a 29 mm diameter hole (in plasterboard) with an outer casing, code 84915(for concrete or masonry). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
LUCE & LIGHT
PROJECTOR LIGHT
OUTDOOR LIGHTING
GINKO 2_GN20021FTH-1

Surface mount outdoor projector light body in Anticorodal aluminium. AISI 316L stainless steel bracket. Screen in serigraphed, transparent, tempered extra-clear glass. Accessories available In-Ground Spike, Anti-glare Snoot and Honeycomb upon request. IP66, IK07

DIMENSION :  Ø54x58MM

Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset