logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
ELR
SURFACE MOUNTED DOWNLIGHT
INDOOR LIGHTING
SNOOP 4 SURFACE_100PLE

Compatible with 100CLO, 100CLE and 100PLE series LED modules.Colour temperature options 2700K, 3000K, 4000K, 5000K, WarmDim. Colour rendering index 85 or 95. Up to 50,000 hours L80 lamp life with LM80 tested LED chip packages. Beam pattern options ClassicPRO 12, 20, 35, 60 Luminous flux 1063lm to 3000lm depending on LED module.Supplied with non-dimmable or phase0-10VDALI dimmable LED driver. Automated Thermal Protection System. ComfyEYE, reduced flicker percentage, Interchangeable LED module system, Optional colour and light effect filters, and honeycomb anti-glare louvre, For the latest specifications please refer to the website. The ingress protection degree is IP40.

Compare
CDN LIGHTING
RECESSED DOWNLIGHT
INDOOR LIGHTING
HS6070R 7W36D


Compare
APEX
WALLWASHER
OUTDOOR LIGHTING
WW4228_36W_28D

Rigid Wallwaher luminaire come with 3 different length, 348mm, 515mm and 1015mm. Various wattage and beam angle available. IP66

Compare
LIGHTFORMS
SUSPENDED PENDANT LIGHT
INDOOR LIGHTING
LF157043
Big Triplane features three-side illumination from a 108mm lensed channel. Extremely efficient, the white opal, acrylic lens is impact-resistant. Individual or continuous row mounting. Remote driver. Available in suspended and surface models.
Compare
SPARK
SURFACE TRACKLIGHT
INDOOR LIGHTING
SPK9601-25W-45D

Track Adjustable Spotlight luminaire body made of aluminium housing with white powder coated finish. Reflector finish available White, Silver and Black Chrome. Black finish and honeycomb accessory available upon request.

Compare
TRAXON
LINEAR LIGHT
OUTDOOR LIGHTING
Media Tube Go Mono 120x180

Media Tube® Go Mono is the next-generation Tube Mono product, featuring a wider design and significantly higher light efficacy for superior, uniform illumination. Operating on a 48V system with extended hand-in-hand connectivity, it supports longer continuous runs with simplified installation. The fixture offers broad compatibility with ON/OFF, PWM, 0-10V, and DALI control protocols, providing flexibility for diverse lighting scenarios.

Compare
LINEALIGHT
LED STRIP
OUTDOOR LIGHTING
RUBBER 2D_MINI_82147

Single emission led strip for outdoor application. The super warm LED light source with a diffused light distribution is composed of 140 topled LEDs with CCT of 2700 K and a CRI 85; the source luminous flux is 510 lm, with a 102.0 lm/W nominal luminous efficacy. The device body is made of technopolymer and features a white finish; the diffuser is made of pu. The ingress protection degree is IP67,IK05.

Compare
IGUZZINI
RECESSED LINEAR LIGHT
OUTDOOR LIGHTING
859C.15
Direct light linear luminaire, designed to use monochrome LED lamps. For ground, wall and ceiling installations, the product requires an outer casing (to be purchased separately). The outer casing is not required for installations in panelled walls and ceilings. The body is made of extruded aluminium and includes die-cast aluminium end caps with 50/60 Shore A silicone seals.
Compare
PROLICHT
CEILING LIGHT
INDOOR LIGHTING
220-0573

The recessed spot INVADER SEMI-ON is part of the product family INVADER. With 2 powder coated options 625 colour combinations can be achieved. Stated photometric values correspond to operation by 250 mA; a suitable ballast needs to be sourced separately and is not scope of delivery. Dimming (# 220-0573) depends on the used ballast and may vary. The spot with direct illumination corresponds to protection class SK3 at IP20. A PROLICHT lense pack is optionally available.

Compare
LINEALIGHT
CEILING LIGHT
INDOOR LIGHTING
82727W45
Single emission ceiling lights for indoor application. The warm white LED light source with a wide flood light distribution is composed of 20 powerled LEDs. The device body is made of aluminium 6060 and features a embossed white ral 9003 finish, processed by means of powder coating; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP40; the total weight is of 3.2 kg. The power supply driver is not provided and is to be ordered separately. The power supply cable is included and features a 0.1 m length. The device features protection class III and can be ceiling-mounted, with a 742 mm diameter hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
ACCLAIM
LED STRIP
OUTDOOR LIGHTING
FLEXEE3
Flex Eco Exterior is an ultra low power, IP68, thin and flexible LED circuit strip in a 16.4’ spool. It’s low wattage and high efficacy make it the perfect compliment to green energy projects. It can be cut every four inches to create the exact length needed for your specific application. The combination of its high output and low profile allows for a wide variety of cove, millwork, signage, and many other exterior applications.
Compare
ARTEMIDE
TRACKLIGHT
INDOOR LIGHTING
FU51104APP
Funivia is a functional network of relationships, material and immaterial, free and inclusive capable of evolving through the cooperation of its elements. It starts from the essential, with a "mountaineer's" spirit it discovers a new level of freedom of light in spaces. A rope, the cable that carries energy, and nails, the fastening elements in space, are the basis for going far, overcoming the limits given by the rigidity of systems. The cable, with a special minimal cross-section but capable of supporting both mechanical and thermal stresses, is the energy distribution channel of the system and the load-bearing element on which the light elements are connected, it runs seamlessly in space transcending the limits of three dimensions. It is attached to the side, floor or ceiling through mechanical elements. It runs inside them without requiring to be cut and thus interrupted, drawing in space a network of regular lines, horizontal or vertical, but also freely inclined. From a single power point it can run indefinitely, the only limit being the power installed on its length. Funivia is not bound to a power grid or a predefined design, it can enter any space at any time and draw light with the utmost freedom, it can generate an extraordinary performance quality even without an ad hoc installation a specific intervention in the space. The light elements hook on the cable thanks to a "bridge" element, a kind of current-stealing lock that mechanically fixes the luminaire and takes energy from the cable. Also in this digital network each luminaire has its own identity, its own IP address, through which it can be managed with Dali systems or with Artemide App It is a sustainable approach at the level of production, distribution, installation, consumption, use, integration of elements that already exist without necessarily calling for the creation of new additional products. Funivia breaks a pattern common to existing lighting systems, breaking out of the rigidity of fixed modules (in space, stock, production).
Compare
PROLICHT
WALLWASHER
INDOOR LIGHTING
OIKO PRO IN 320-1140.03-03.27

OIKO impresses as a barely visible, perfectly glare-free light source. With their minimal installation depth, the luminaires serve as both accent and ambient lighting. Different sizes and reflectors make OIKO an all-round talent. Easy to install, OIKO leaves nothing to be desired with various accessories such as colored KORONA CONES.

Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
MODOC_ R_C00583WHWSP-19°

Single emission recessed downlights for indoor application. The warm white LED light source with a spot ligh distribution is composed of 1 arrayled LEDs. The luminaire body is made of technopolymer and features a white finish; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP20.

Compare
MEYER
UP/DOWN WALL LIGHT
OUTDOOR LIGHTING
8 706 146 009
Housing made corrosion‑resistant die‑cast aluminum AlSi12, polyester powder coated by high‑quality and UV‑stabilized coating process, Colour: black ral 7021, all exterior parts are stainless steel, UV stabilised, impact‑resistant polycarbonate cover , silicon gasket, with 4 stainless steel screws, wall arm: 2 drilled holes Ø 6,5 mm, spacing 282 mm, tilt range: 310°, cable gland: PG11, connecting terminal: 3 pole, highly efficient optics made of transparent thermoplastic for precise lighting tasks, integral driver (AC/DC), CRI > 80, max 2 SDCM, service life L90/B10 > 50.000 h, Beam angle (fwhm): 15° / 103°, luminous flux: 1175 lm, wattage: 15 W, delivered lumens 78 lm/W, protection type IP65, protection class I, impact resistance IK10, windage area 0,04 m², dimensions (L×H×W): 328 × 47 × 135 mm, weight 3.3 kg. The modular luminaire design makes the replacement of components possible. The product meets the demands of the applicable EU guidelines and product safety regulations and bears the CE mark. Customized solutions and modifications are possible: Special ral, db or ncs colours as polyester powder coat, luminaires in 2700 K and other colour temperatures and versions for high ambient temperature.
Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset