logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
SPARK
WALL LIGHT
OUTDOOR LIGHTING
SPK-B1008

Indoor / Outdoor Wall light made of die cast aluminium body, protective powder coated finishing. Silicon rubber gasket and external driver. IP65

DIMENSION : 150*46MM

Compare
ARTEMIDE
INGROUND FOOT LIGHT
OUTDOOR LIGHTING
T415900W00

Light fixture with high-performance LED light sources. Drive-over recessed floor installation with floorprotruding cap. All the versions are drive-over up to 5000Kg. Due to the low height of the cap, Megara 90 is also suitable for installation in walk-over areas, being careful to avoid areas of direct transit. Composed by body, cap, diffuser, recessing box. Body and cap in painted EN AB44100 aluminium, silicone gaskets; provided with 30 cm-long pre-resined three-pole connection cable. Electronic ballast integrated in the body. Diffuser in UV resistant polycarbonate.Power connection to the mains by means of the IP67 connector supplied with the light fixture, which can be housed in the recessing box and is suitable for cables with a diameter from 5 to13.3 mm. Fixing to the recessing box is ensured by means of anti-vandal screws TORX. Recessing box for laying in reinforced polymer to be ordered separately. Radial emission beam optic. White monochromatic LEDs available in 3 colour temperatures in AISI 316 stainless steel. Painted die-cast aluminium with 3-stage outdoor treatment. Technical features of light fixtures in compliance with EN60598-1 and part 2-13. IP Rating IP65-IP67.ENEC approved.Insulation class I.

Compare
UFO LIGHTING
FIBRE OPTICS
INDOOR LIGHTING
UFO MIC100-PT

The Micro LED 100PT or 100PC both models feature bright white light output and are fitted with a decorative wheel to provide lighting effects. The Micro LED 100PT features a twinkle wheel which constantly rotates to provide

a shimmering starry sky effect. The Micro LED 100PC has an inbuilt color wheel which rotates slowly to give a gentle colored effect to the star points. No user intervention is required with either of these units - just plug in and

enjoy the lighting effects as you relax.

Compare
SPARK
SURFACE TRACKLIGHT
INDOOR LIGHTING
SPK9401-20W-45D

Track Adjustable Spotlight luminaire body made of aluminium housing with white powder coated finish. Reflector finish available White, Silver and Black Chrome. Black finish and honeycomb accessory available upon request.

Compare
SPARK
SURFACE TRACKLIGHT
INDOOR LIGHTING
SPK9501-6W-15D

Track Adjustable Spotlight luminaire body made of aluminium housing with white powder coated finish. Reflector finish available White, Silver and Black Chrome. Black finish and honeycomb accessory available upon request.

Compare
TRILUX
PANEL LIGHT
INDOOR LIGHTING
VALINEOG4_ 8423240

Recessed luminaire with microprismatic cover (600*600mm). lay in luminaire for ceilings with exposed grids, the luminaire is also suitable for surface mount installation with an accessory. Luminaire frame made of aluminium and rear body made of sheet steel. Microprismatic cover of PMMA with narrow wide light distribution. Glare evaluation <UGR19, suitable for workstations with computer screens, offices, corridors, foyers, conference room, retail areas and waiting zones.

Compare
LIGHTFORMS
SUSPENDED PENDANT LIGHT
INDOOR LIGHTING
MOONBAND 90_3M

The MoonBand collection of suspended and surface mount rings is the larger-form popular family of MoonRing luminaires. NoonBand 90 the widest series is available in 5 different diameters and 5 standard outputs plus RGB+W and offers the choice of direct, indirect or direct/indirect distributions. Drivers are integral.

DIMENSION : 3000*90*80MM

Compare
XAL
SURFACE MOUNTED DOWNLIGHT
INDOOR LIGHTING
BO 32_049-6120518S 002-90742
Cylindrical spotlight in aluminium; surface black powder coated; 350° rotatable and 90° tiltable; recessed version with trim; suitable for ceiling thickness of 2-25 mm; passive cooling of the LEDs through improved heat sink geometry; with COB (Chip on Board) technology for maximum efficiency; no appearance of multiple shadows
Compare
LINEALIGHT
INGROUND UPLIGHT
OUTDOOR LIGHTING
ORMA_AJ_81207M15

Single emission uplights for outdoor application. The super warm LED light source with a spot light distribution is composed of 1 arrayled LEDs with CCT of 2700 K and a CRI 80; the source luminous flux is 1088 lm, with a 136.0 lm/W nominal luminous efficacy. The device body is made of die-cast aluminium en ab - 46100 and features a black finish, processed by means of open pore anodizing + powder coating; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The in

Compare
FLOS
RECESSED DOWNLIGHT
OUTDOOR LIGHTING
ECLECTIC 90 DIM TO WARM_05.8111.40

Eclectic Ø90 Dim To Warm. Adjustable Downlight (40º tilt, 360º rotation). “Cone” style façade. Necessary installation pre-frames, not included (to be orderedseparately). Recessed position ofthe LED: 41º cut-off angle. IP20 water tightness (for IP54, pleaseask the dedicated accessory). Alternative options for lenses, orientation modules and style façades are available as spare parts. The ingress protection degree is IP54.

Compare
LUCENT
RECESSED DOWNLIGHT
OUTDOOR LIGHTING
PR0SPEX SOFT70 FIXED _3000K-24°
Soft70 fixed IP65 downlight with deep regressed light source and supplied with a separate die cast trim for finished ceilings. Available in both White or Black finish as standard. This product can accommodate a wide choice of LED light sources including our LED50 ONE family of modules, Xicato and retrofit MR16 & GU10 LED lamps.
Compare
SPARK
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SPK0623-24W-15D

Recessed adjustable rectangular downlight come with snoot, luminaire body made of aluminium housing with white powder coated finish. Black finish and Honeycomb accessory available upon request.

Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
97130W40
Single emission downlights for indoor application. The warm white LED light source with a medium flood light distribution is composed of 1 arrayled LEDs. The device body is made of PC, processed by means of coating. The ingress protection degree is IP20; the total weight is of 1.9 kg. The power supply driver is not provided and is to be ordered separately. The power supply cable is included and features a 0.30 m length. The device features protection class III and can be ceiling-mounted, with a 236 mm diameter hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
LUCE & LIGHT
BOLLARD
OUTDOOR LIGHTING
PIVOT B 2.9_10W-25°

Outdoor Surface mount bollard made of ANTICORODAL EN AW 6082 low-copper-content aluminum alloy for excellent resistance to corrosion. Screen in serigraphed, tempered extra-clear glass. Accessories come with honeycomb louvre. Pole available in 500mm, 800mm and 1100mm 3 different height . IP66, IK08,

Compare
SPARK
TRACKLIGHT
INDOOR LIGHTING
SPK9004-25W-36D

Track Adjustable Spotlight luminaire body made of aluminium housing with white powder coated finish. Black finish and honeycomb accessory available upon request. It come with different types of beam angles.

Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form