logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
CDN LIGHTING
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
Karma HS6050R-2_18W_24D

Fixed and adjustable in one; When tilting at any angle, patented spherical shielding design helps prevent light leak and gap. Special moving gear tilt design provides stabilized torque for accurate tilt with sound and force feedback when rotating. Besides, Bach 5s series have pull ring equipped for easy maintenance and internal angle mark for accurate aiming. Professional optics, precise and round light spot.

Compare
LUMASCAPE
INGROUND LINEAR LIGHT
OUTDOOR LIGHTING
LS3152 - 18D 830 WD 1


Compare
SPARK
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SPK8368-3-15W-24D

Recessed adjustable Pin-hole downlight made of aluminium housing with white powder coated finish. Black finish and honeycomb accessory available upon request.

Compare
CASAMBI
CONTROL SYSTEM
CONTROL SYSTEM
AC ON/OFF SENSOR_MC177S B1

casambi Bluetooth mesh networking was adopted, casambi App was used to design parameters and set application scenarios. Conform to new ERP standards, low stand-by power. 5.8GHz microwave license-free ISM wave band, bulk order are compliant with RED approval. Compact size design, can be built-in most of light fixtures. Input and Output terminals are convenient for connecting.

Compare
NEKO
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
TSA3+M4P4-0301818N-NN

LED Module for NEKO CLUB trim made of die-cast aluminium; black powder-coating finish (RAL 9005); System Power 21W; measurement Ø50mm; luminaires height 76mm; CCT 3000K with a System Luminous Flux of 1600lm; high color rendering at an index of CRI97; SDCM: 2; after a lifetime of 50000h L80B10 min. 80% of the luminous flux with energy efficient BRIDGELUX LED Chips; 5 years warranty; beam characteristic with 18° beam angle; lighting perfectly suitable for reading, writing as well as computer and c

Compare
PUK
FLOODLIGHT
OUTDOOR LIGHTING
RING POLE MEGA HP_807016_2x88W-10°
Floodlight for outdoor installation on a pole diam. 60 mm or 76 mm, with 355° swivel pole attachment and allowing horizontal adjustment of +90° / -40°. Phospho-chromatised and polyester powder coated die-cast copper-free aluminium base and head, tempered safety glass, moulded silicone gaskets and o-rings, with screws in stainless steel. Swivel pole joint with graduated scale and mechanical aiming lock. Built-in LED driver, with 12 x CREE “XH-P 35” LED. IP66 rating.
Compare
LG
LED MEDIA SCREEN
INDOOR LIGHTING
LTAK140-GW

LG Color Transparent LED Film is a revolution in display technology. It is a transparent LED film that can be pasted to existing glass surface, thanks to its special self-adhesive material. Its superb transparency endows the glass surface or window to which it is attached with a mystical beauty full of vivid color. Renovate your ordinary store or building with this revolutionary material that interacts seamlessly with the surrounding environment.

DIMENSIONS: (WxHxD) 668x480x20mm

Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
NITUM_R_C00269WHMML
Single emission recessed downlights for indoor application. The super warm white LED light source with a medium flood light distribution is composed of 1 powerled LEDs. The luminaire body is made of brass and features a white finish, processed by means of coating. The ingress protection degree is IP44
Compare
LINEALIGHT
INGROUND UPLIGHT
OUTDOOR LIGHTING
ORMA AJ_81205M30

Single emission uplights for outdoor application. The super warm LED light source is composed of 1 powerled LEDs. Luminaire body is made of die-cast aluminium en ab - 46100 and features a black finish, processed by means of open pore anodizing + powder coating; the diffuser is made of extra clear glass - tempered. The ingress protection degree is IP68. IK10

Compare
IGUZZINI
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
REFLEX N105

Round adjustable luminaire designed to use an LED lamp with C.O.B.technology. Version without rim for mounting flush with ceiling. Lower reflector vacuum-metallised with aluminium vapours with an anti-scratch protective layer. Anodised aluminium upper reflector. Black, zinc-plated sheet steel bracket. The luminaire can be rotated 30° relative to the horizontal plane and 358° about the vertical axis. The luminaire is fitted with mechanical locks for light beam aiming. Painted extruded aluminium dissipater. IP20

Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
MODOC_ R_C00582WHWSP-19°

Single emission recessed downlights for indoor application. The warm white LED light source with a spot light distribution is composed of 1 arrayled LEDs The luminaire body is made of technopolymer and features a white finish; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP20.

Compare
LINEALIGHT
PROJECTOR LIGHT
OUTDOOR LIGHTING
CLARK316_C00154SEWSP-16°

Single emission projectors for outdoor application. The warm white LED light source with a spot light distribution is composed of 1 arrayled LEDs. The luminaire body is made of aisi 316 steel and features a steel finish, processed by means of electropolishing; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The ingress protection degree is IP68.IK10.

Compare
SPARK
SURFACE TRACKLIGHT
INDOOR LIGHTING
SPK9601-30W-24D

Track Adjustable Spotlight luminaire body made of aluminium housing with white powder coated finish. Reflector finish available White, Silver and Black Chrome. Black finish and honeycomb accessory available upon request.

Compare
SPARK
SURFACE MOUNTED DOWNLIGHT
INDOOR LIGHTING
SPK5011-8W-36D

Surface mounted downlight luminaire body made of aluminium housing with white powder coated finish. Reflector finish available White, Silver and Black Chrome. Black finish and honeycomb accessory available upon request.

Compare
LINEALIGHT
CEILING LIGHT
INDOOR LIGHTING
65363W00
Single emission ceiling lights for indoor application. The warm white LED light source with a diffused light distribution is composed of 336 topled LEDs. The device body is made of aluminium 6060 and features a embossed black ral 9005 finish, processed by means of powder coating; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP40; the total weight is of 7 kg. The power supply driver is not provided and is to be ordered separately. The device features protection class III and can be wall lights or ceilingmounted. Compliant with the EN 60598-1 standard and its specific provisions.
Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset