logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
LINEALIGHT
WALL LIGHT
INDOOR LIGHTING
ADJUSTABLE_POUND_WALL_82000W60

Pound_Wall, created to adapt to any type of wall-mounted technical lighting needs, uses a new joint type that allows the product to be adjusted 90° on the vertical axis and 350° on the horizontal axis. Single emission wall lights for indoor application. The warm white LED light source with a wide flood light distribution is composed of 1 arrayled LEDs.The luminaire body is made of die-cast aluminium en ab - 46100 and features a embossed white ral 9003 finish, processed by means of powder coating. The ingress protection degree is IP20.

Compare
PLUS LIGHT TECH
RECESSED DOWNLIGHT
INDOOR LIGHTING
PERDU ONE DEEP RECESSED 10MM NARROW_3000K-39°

The luminaire  ceiling- recessed downlight that highlight the desired subject or place and provide optimum illumination by being nondescript. The simplicity of its form provides smooth integration in architectural features.

Compare
LINEALIGHT
WALL LIGHT
OUTDOOR LIGHTING
CUBIT_76311W60
Single emission wall lights for outdoor application. The warm white LED light source with a medium wide flood light distribution is composed of 1 arrayled LEDs. The luminaire body is made of die-cast aluminium en ab - 46100 and features a white finish, processed by means of open pore anodizing + powder coating; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The ingress protection degree is IP65, IK08.
Compare
LUMASCAPE
INGROUND LINEAR LIGHT
OUTDOOR LIGHTING
LS3152 - 18D 830 FL 1


Compare
BOVER
TABLE LAMP
OUTDOOR LIGHTING
NANS PORTABLE M/49_30911309160U

Hand woven with a recyclable and non-toxic synthetic polyethylene fiber. Metal surfaces coated with cataphoresis and epoxy polyester paint. The luminaire made of stainless steel, aluminum, teak wood, synthetic Fiber. The ingress protection degree is IP54.

Compare
XAL
PANEL LIGHT
INDOOR LIGHTING
COMBO 450_064-1041637K

Round light fitting in aluminium; recessed light with wrap around edge; suitable for ceiling thickness of 10-25 mm; surface pure white powder coated; installation without tools using snap spring closure; external converter for ceiling insertion, through-wiring suitable; electrical connection by means of reverse polarity protected plug system; LED board highly reflective lacquered for higher efficiency; light colour 4000 K; ≤ 3 SDCM (initial MacAdam); CRI ≥ 90;

Compare
XAL
SUSPENDED LINEAR LIGHT
INDOOR LIGHTING
LITO 60 DIRECT-INDIRECT_046-5224618Z

Luminaire housing made of extruded aluminium profile; light tight final end caps made of aluminium; no visible screws; angular design; surface jet black powder coated; suspended luminaire with 1500mm cable suspension; with integrated toolless suspension height adjustment on the luminaire; spring clip attachment to the luminaire; freely positionable; incl. transparent feed; LED light inset consisting of highly reflective lacquered aluminium for improved thermal management;

Compare
WEVER & DUCRE
RECESSED DOWNLIGHT
INDOOR LIGHTING
DEEP POINT 1.0 IP44

Round Recessed downlight made from die-cast aluminium housing and matt black powder coated. Suitable for ceiling thickness of 4-25 mm; recessed depth 68 mm; with COB (Chip on Board) technology for maximum efficiency; IP44

Compare
PROLICHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
120-0195

The rimless spot OIKO from the familiy OIKO consists of aluminum-die-cast. With 2 powder coated options 625 colour combinations can be achieved. Stated photometric values correspond to operation by 500 mA; a suitable ballast needs to be sourced separately and is not scope of delivery. Dimming (# 120-0195) depends on the used ballast and may vary. The spot with direct illumination corresponds to protection class SK3 at IP20. ZERO LIGHT LEAKAGE technology guarantees trouble-free use in acoustic ceilings.

Compare
LINEALIGHT
WALL LIGHT
OUTDOOR LIGHTING
ORMA_AM_83633M07
Single emission wall lights for outdoor application. The super warm LED light source with a asymmetric wallwasher light distribution is composed of 1 powerled LEDs with CCT of 2700 K and a CRI 80; the source luminous flux is 490 lm, with a 98.0 lm/W nominal luminous efficacy. The device body is made of die-cast aluminium en ab - 46100 and features a black finish, processed by means of open pore anodizing + powder coating; the diffuser is made of extra clear glass - tempered. The ingress protection degree is IP68.
Compare
SPARK
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SPK0601-12W-15D

Recessed adjustable square downlight luminaire body made of aluminium housing with white powder coated trim finish. Black finish and honeycomb accessory available upon request.

Compare
XAL
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SASSO 40 ADJ_048-2820411M 048-2896318 002-90752

Round adjustable recessed spotlight made of die-cast aluminium and epoxy black finishing. 360° rotatable and 30° tilt able angle. Suitable for ceiling thickness of 2-25 mm. Passive cooling of the LEDs through improved heat sink geometry with COB (Chip on Board) technology for maximum efficiency. No appearance of multiple shadows. IP40

Compare
FLOS
SUSPENDED LINEAR LIGHT
INDOOR LIGHTING
INFINITY 100_N10D143G14B

Suspension linear light luminaire come with aluminum installation profile and diffusers. Drivers included in lighting modules for 220-240V connection to mains or to other lighting modules.

Compare
LUCE & LIGHT
WALL LIGHT
OUTDOOR LIGHTING
NT221000005TTF

Wall mounted for outdoor applications, double beam; surface mounted (wall); Body material: body made of low-copper-content die-cast aluminium alloy EN AB 46100 for excellent resistance to corrosion; Finishes: grey finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard us

Compare
LIGHTFORMS
WALL LIGHT
INDOOR LIGHTING
LF156773
Cygnus came about due to demand for a track fitting following the style and theme of all our designs, ie: simple, strong and well finished. Cygnus utilises the LEDil reflectors for a perfect and reliable light shape. The extruded aluminium housing and is available in our full range of finishes. Cygnus is supplied as standard with a Tridonic in track adapter, so the control gear is integral. Other adapters are available, but should be specified to the factory.
Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset