logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
IGUZZINI
LINEAR LIGHT
OUTDOOR LIGHTING
UNDERSCORE INOUT_EA23

Luminaire for indoor and outdoor architectural linear lighting – with neutral white monochrome Leds – on a 24Vdc flexible white circuit, length L=7004mm. The led circuit is completely IP68 encapsulated with a white (outside) and milky finish (over light emission) high performance polymer sheath: this material allows the device to be installed and used even at extreme temperatures: - 30°C +45°C. Underscore InOut TOPBEND can be used to create straight lines on flat and curved surfaces. Even, spotfree lighting is guaranteed along the entire strip profile up to the end parts. The ingress protection degree is IP68,IK08.

Compare
MEYER
POLE LIGHT
OUTDOOR LIGHTING
8 905 246 049
Housing made of corrosion‑resistant die‑cast aluminum AlSi12, polyester powder coated by high‑quality and UV‑stabilized coating process, Colour: black ral 7021, all exterior parts are stainless steel, tempered safety glass, anti‑reflective coating from 1 side, dark screenprint, silicon gasket, closure with 3 stainless steel screws, for installation on poles Ø 60 ‑ 100 mm, tiltable base made of powder coated aluminum, 2 drilled holes Ø 9 mm, spacing 95 mm, 1 centre hole Ø 13.5 mm, tilt range: 90°, 360° adjustable, cable gland: M20, connecting terminal: 3 pole, focusable projection lens for precise light control and sharp‑edged image projections,integral driver (AC/DC), CRI > 80, Beam angle (fwhm): 22°, luminous flux: 1445 lm, wattage: 55 W, delivered lumens 26 lm/W, protection type IP65, protection class I, impact resistance IK08, windage area 0,076 m², dimensions: Ø 215 mm, width 390 mm, weight 8 kg. The modular luminaire design makes the replacement of components possible. The product meets the demands of the applicable EU guidelines and product safety regulations and bears the CE mark.
Compare
ARTEMIDE
SUSPENDED LINEAR LIGHT
INDOOR LIGHTING
2106010A

The Alphabet of Light system is a language of light that continues to grow with new curved elements, developing with increasing freedom in spaces. It is a fundamental principle that generates an open system through a few basic modules. Thanks to precise geometric proportions, these modules can be combined to construct infinite structures of light, whether essential or more complex, linear or curvilinear, all environmentally certifiable with EPD (Environmental Product Declaration). The concept by BIG combines with Artemide's optoelectronic expertise to define an innovative construction principle and provide a continuous and comfortable light. It is a minimal presence that encompasses not only highly innovative optoelectronic and patented mechanical components but also management innovations. The system is controllable through the Artemide App to create freedom not only in designing geometries but also in defining dynamic performances, programmable or modifiable in real time.

Compare
SPARK
SURFACE TRACKLIGHT
INDOOR LIGHTING
SPK9411-15W-15D

Track Adjustable Spotlight luminaire body made of aluminium housing with white powder coated finish. Reflector finish available White, Silver and Black Chrome. Black finish and honeycomb accessory available upon request.

Compare
LINEALIGHT
CEILING LIGHT
INDOOR LIGHTING
82068W85
Single emission ceiling lights for indoor application. The warm white LED light source with a adjustable focus light distribution is composed of 1 arrayled LEDs. The device body is made of die-cast aluminium en ab - 46100 and features a embossed black ral 9005 finish, processed by means of powder coating. The ingress protection degree is IP40; the total weight is of 1.35 kg. The device features protection class II and can be ceiling-mounted. Compliant with the EN 60598-1 standard and its specific provisions.
Compare
SPARK
SURFACE MOUNTED DOWNLIGHT
INDOOR LIGHTING
SH-SS12038

Model type Downlight Spotlight Shines Shadow (SH-SS12038). Dimension Dia 38mm x 69 mm. Fixture Colour Black Housing.

Compare
SPARK
LED NEON TUBE
OUTDOOR LIGHTING
LWTG3020-30*25MM

Flexible Neon strip Side/Horizontal bend available CCT from 2700K, 3000K and 4000K. Able to work with dimming and non-dimming driver. Accessories have mounting

bracket, mounting rail and flexible rail.

DIMENSION : (L)1000*(W)30*(H)25mm

Compare
FORMALIGHTING
RECESSED DOWNLIGHT
INDOOR LIGHTING
G953BO11-9727292D10
LED Built-in with body - High Power LED - Power LED. 3-step MacAdam
Compare
WE-EF
WALLWASHER
OUTDOOR LIGHTING
187-0480
Marine-grade, all-aluminium construction. 5CE superior corrosion protection including PCS hardware. PMMA lens. Silicone rubber gaskets. 1.2 m of flexible PVC-free cable. Luminaire is factory-sealed and does not need to be opened during installation. Integral EC electronic converter in thermally-separated compartment. Advanced thermal management protects LEDs while optimising lumens output. Removable LED boards for upgrading. DALI interface.
Compare
SPARK
INGROUND UPLIGHT
OUTDOOR LIGHTING
RGL195_15D


Compare
LINEALIGHT
WALLWASHER
OUTDOOR LIGHTING
81689W25
Single emission lines for outdoor application. The warm white LED light source with a elliptical light distribution is composed of 12 powerled LEDs. The device body is made of aluminium 6060 and features a anodised aluminum finish, processed by means of 20 µm anodizing; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The ingress protection degree is IP68; the total weight is of 2.010 kg. The power supply cable is included and features a 0.250 m length. The device features protection class II and can be floor-mounted with an outer casing, code 99764 (for concrete or masonry). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
SPARK
RECESSED DOWNLIGHT
INDOOR LIGHTING
SPK2201_20W_36D

Recessed fixed downlight made of aluminium housing with white powder coated finish. Inner reflector available in Silver, Chrome black, Mirror chrome and white color finish.

Compare
LINEALIGHT
CEILING LIGHT
INDOOR LIGHTING
64631W15
Single emission downlights for indoor application. The warm white LED light source with a medium wide flood light distribution is composed of 1 powerled LEDs with CCT of 3000 K and a CRI 90; the source luminous flux is 179 lm, with a 89.5 lm/W nominal luminous efficacy. The device body is made of plaster and features a white finish; the diffuser is made of polyamide. The ingress protection degree is IP20; the total weight is of 0.42 kg. The power supply driver is not provided and is to be ordered separately. The total absorbed power is 2 W. The power supply cable is included and features a 0.170 m length. The device features protection class III and can be ceiling-mounted, with a 85 x 85 mm hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
PHOS
ADJUSTABLE DOWNLIGHT
OUTDOOR LIGHTING
NA-EE-MTA_2700K-3W-20°
The Nano Eclipse Mini Trim is a recessed, tilt behind, adjustable downlight with a Ø56mm bezel and features a beautifully sculpted anti-glare baffle. Unique, elegant small aperture. Easily interchangeable optics. Flawless finishes available on all components. 22° Tilt, 360° Rotation.
Compare
CDN LIGHTING
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
BACH 5s BHJ7055C_50D

Fixed and adjustable in one; When tilting at any angle, patented spherical shielding design helps prevent light leak and gap. Special moving gear tilt design provides stabilized torque for accurate tilt with sound and force feedback when rotating. Besides, Bach 5s series have pull ring equipped for easy maintenance and internal angle mark for accurate aiming. Professional optics, precise and round light spot

Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset