logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
TRAXON
LED STRIP
OUTDOOR LIGHTING
Media Pixel Ribbon DMX Flat

Aluminium mounting channels

Compare
XAL
PIN HOLE DOWNLIGHT
INDOOR LIGHTING
SPIO 20_ 048-1610518F 002-90783

Round recessed spotlight in die-cast aluminium; surface black powder coated; with trim; suitable for ceiling thickness of 2-25 mm; installation without tools using snap spring closure; passive cooling of the LEDs through improved heat sink geometry

Compare
FLOS
MAGNETIC TRACKLIGHT
INDOOR LIGHTING
03.8006.14.1V

Diffused LED light module to be installed in The Tracking Magnet System.

Compare
IGUZZINI
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
REFLEX_N090

Round adjustable luminaire made of die-cast aluminium body. Lower reflector vacuum-metallised with aluminium vapours with an anti-scratch protective layer. Anodised aluminium upper reflector. Black, zinc-plated sheet steel bracket. The luminaire can be rotated 30° relative to the horizontal plane and 358° about the vertical axis. The luminaire is fitted with mechanical locks for light beam aiming.

Compare
LINEALIGHT
WALL LIGHT
INDOOR LIGHTING
81998W60
Single emission wall lights for indoor application. The warm white LED light source with a wide flood light distribution is composed of 1 arrayled LEDs. The device body is made of die-cast aluminium en ab - 46100 and features a embossed black ral 9005 finish, processed by means of powder coating. The ingress protection degree is IP20; the total weight is of 0.8 kg. The device features protection class I and can be wall lights-mounted. Compliant with the EN 60598-1 standard and its specific provisions.
Compare
SPARK
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SPK0632-30W-55D

Recessed adjustable downlight luminaire body made of aluminium housing with white powder coated finish. Black finish and Honeycomb accessory available upon request.

Compare
IGUZZINI
SURFACE TRACKLIGHT
INDOOR LIGHTING
VIEW OPTI BEAN LENS ROUND_QN72.47

Adjustable spotlight with adapter for installation on 48V low voltage track. Luminaire made of die-cast aluminium with a front part in a thermoplastic material. The adapter made of a thermoplastic material includes the DC/DC driver circuit with a DALI dimmable function. The double adjustability of the spotlight allows a 360° rotation about the vertical axis and 90° tilting relative to the horizontal plane. 

Compare
LUCE & LIGHT
INGROUND LINEAR LIGHT
OUTDOOR LIGHTING
COLORADO 1.2_CA1210000250SN

Outdoor recessed linear profile drive-over up to 2000 kg. Black anodized aluminium finish obtained by electro-colouring to give the product better heat dissipation and the material corrosion resistance; Screen material: 10-mm-thick transparent, tempered extra-clear glass, high-transmittance with grey-vitrified serigraphy (RAL 7015), to ensure chromatic uniformity and excellent resistance to knocks and scratches. IK10, IP67

DIMENSION : L1279*W121*H121MM

Compare
FLOS
RECESSED DOWNLIGHT
INDOOR LIGHTING
Eclectic 70 Fixed Cone_05.8010.40

Eclectic Ø70. Non-adjustable Downlight. “Cone” style façade. Necessary installation pre-frames, not included (to be ordered separately). Recessed position of the LED: 47º cut-off angle. IP54 water tightness. Alternative options for lenses, orientation modules and style façades are available as spare parts.

Compare
LIGHTFORMS
RECESSED LINEAR LIGHT
INDOOR LIGHTING
LF157030

Lightplane 1 H features a 25mm linear channel and delivers both direct and indirect lighting. This small channel allows for minimal linear lighting in suspended, wall and surface (direct only) applications. Driver is REMOTE.

Compare
LIGMAN
INGROUND UPLIGHT
OUTDOOR LIGHTING
KIOS 1 KI-60445-F-8030-ND-00

Die-cast aluminium housing. Pre-treated before powder coating ensuring high corrosion resistance. 5.5 mm thick front ring in grade 316 stainless steel. Single cable entry, through wiring upon request. Stainless steel fasteners in. Recessing box in high-density polyethylene is included. Suitable for drive-over with a maximum load of 2000 kg. Vehicles with pneumatic tires can drive over the luminaire but the speed must not exceed 50 km/h. Load is transferred by the housing to the foundation. The distance between the floodlight and the illuminated surface should be at least 0.5 m

Compare
LIGHTFORMS
SURFACE MOUNTED LIGHT
INDOOR LIGHTING
LF156907
Noventa 3.5 is a suspended, wall/surface or recessed luminaire that creates an architectural 90 degree corner. For two-sided illumination around a perimeter, use a wall/surface model. Hang a suspended “L” model for illuminating a wall surface and to provide ambient downlight. Hang a suspended “diamond” model to provide a wide swath of direct ambient downlight. Contact factory for recessed options.
Compare
KREON
SURFACE MOUNTED DOWNLIGHT
INDOOR LIGHTING
PROLOGE 145 DOUBLE KR988752

Prologe 145 double directional surface mount luminaire in steel sheet material and black powder coated finishing.

Dimension : L280mm x W140mm x H155mm

Compare
SIMES
SPOTLIGHT
OUTDOOR LIGHTING
S.1310W.24 (Anthracite grey)

Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion.99.98% pure aluminium reflectors, or with concentrating lenses: The sophisticated optics focuses the beam and makes the light comfortable by reducing the direct glare of the light source. Clear toughened glass.

Compare
IGUZZINI
SURFACE LINEAR LIGHT
OUTDOOR LIGHTING
LINEALUCE_EL38
Direct light luminaire, designed to use monochrome LED lamps, DALI 48Vdc dimmable with searching and addressing function. Ceiling-, wall- or surface-mounted. Consists of a body and supports for installation, to be ordered separately. The body is made of extruded aluminium and includes die-cast aluminium end caps with 50/60 Shore A silicone seals. IP66, IK06.
Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset