logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
SPARK
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SPK0602-16W-36D

Recessed adjustable square downlight luminaire body made of aluminium housing with white powder coated trim finish. Black finish and honeycomb accessory available upon request.

Compare
FORMALIGHTING
BOLLARD
OUTDOOR LIGHTING
3455BN11-803000DA11
Wall and pole mounted light system with body visor housing and ribbed LED dissipator in cast aluminium, inclusive weatherproof silicone gasket and concealed stainless steel screws. Light pole in extruded aluminium. The safety glass is fitted within the luminaire for easy cleaning. Easy installation via the included hard wire rubber cable and IP67 fast connector.
Compare
LINEALIGHT
FOOT LIGHT
OUTDOOR LIGHTING
ENVELOPE_R_83603W07

Single emission wall lights for outdoor application. The warm white LED light source with a asymmetric wallwasher light distribution is composed of 1 powerled LEDs. The luminaire body is made of aluminium 6026 and features a grey finish, processed by means of open pore anodizing + powder coating; the diffuser is made of silicone resin. The ingress protection degree is IP66, IK10.

Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
91410W60
Single emission downlights for indoor application. The warm white LED light source with a medium wide flood light distribution is composed of 1 arrayled LEDs. The device body is made of PC, processed by means of coating. The ingress protection degree is IP20; the total weight is of 1.8 kg. The power supply driver is not provided and is to be ordered separately. The power supply cable is included and features a 0.3 m length. The device features protection class III and can be ceiling-mounted, with a 210 mm diameter hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
DALITEK
CONTROL SYSTEM
INDOOR LIGHTING
DR485-S

Network bridge for RS485 network and Ethernet network. Two groups of independent RS485 ports isoloted by photo-electric isolation components for main and subnet. High speed backbone network. 220V ± 10% 50Hz Single phase 16mA. Control input: 2 × RS485 (isolated) network serial port input; DIN rail installation.

Compare
MARTIN
CONTROL SYSTEM
INDOOR LIGHTING
ARTNET DMX INTERFACE

The Martin DMX/RDM ARTnet to DMX Interface translates Artnet protocol into DMX in/out universes. It can also be used as DMX Splitter Hub, Fail Safe device. As an extension for DMX License, it gives you 4 outputs of DMX universes.

Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
WARP_Q_90724W60

Single emission downlights for indoor application. The warm white LED light source is composed of 1 powerled LEDs. The luminaire body is made of die-cast aluminium en ab - 46100 and features a white finish, processed by means of powder coating; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP44.

Compare
LED LINEAR
LED NEON TUBE
OUTDOOR LIGHTING
VARIOLED FLEX PHOBOS TRUE COLOR W930 1054 TV


Compare
ENDO
PIN HOLE DOWNLIGHT
INDOOR LIGHTING
GLARELESS ADJ PINHOLE_2700K-10.2W-13°
Introducing new pinhole variants to the popular MINI50 series, designed to meet your specific design needs.
Compare
PLUS LIGHT TECH
RECESSED DOWNLIGHT
INDOOR LIGHTING
PERDU ONE Deep RECESSED 13MM WIDE

Introducing ceiling- recessed downlight that highlight the desired subject or place and provide optimum illumination by being nondescript. The simplicity of its form provides smooth integration in architectural features.

Compare
LINEALIGHT
WALL LIGHT
OUTDOOR LIGHTING
76564W12
Double emission wall lights for outdoor application. The warm white LED light source with a extra wide flood light distribution is composed of 2 arrayled LEDs. The device body is made of die-cast aluminium en ab - 46100 and features a embossed white ral 9003 finish, processed by means of open pore anodizing + powder coating; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The ingress protection degree is IP65; the total weight is of 1.5 kg. The device features protection class I and can be wall lights-mounted. Compliant with the EN 60598-1 standard and its specific provisions.
Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
80011W45
Single emission downlights for indoor application. The warm white LED light source with a medium flood light distribution is composed of 1 powerled LEDs. The device body is made of aluminium 6026 and features a embossed white ral 9003 finish, processed by means of powder coating; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP44; the total weight is of 0.047 kg. The power supply driver is not provided and is to be ordered separately. The power supply cable is included and features a 0.170 m length. The device features protection class III and can be ceiling-mounted, with a 20 mm diameter hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
SPARK
LINEAR DOWNLIGHT
INDOOR LIGHTING
SPK1612-25W-40°
Recessed linear downlight, luminaire body made of aluminium housing with white powder coated trim finish. Reflector available Silver, Black Chrome and White finish. Black finish and honeycomb accessory available upon request.. Different type of bean angles.
Compare
MEYER
SPOTLIGHT
OUTDOOR LIGHTING
METASPOT_8 243 267 329

Luminaire housing made of corrosion‑resistant die‑cast aluminum AlSi12, polyester powder coated by high‑quality and UV‑stabilized coating process, Colour: white ral 9002, all exterior parts are stainless steel, tempered safety glass, anti‑reflective coating from 1 side, dark screenprint, silicon gasket. Ingress protection degree is IP65, IK08, Dimensions: Ø 201 mm, width 272 mm.

Compare
LUCE & LIGHT
RECESSED DOWNLIGHT
OUTDOOR LIGHTING
ALTOPIANO 2.0_16°

Altopiano downlights expands the possibilities of ambient lighting in the hospitality and residential sectors: it combines a versatility of 3 different sizes and shape with a multiplicity of atmospheric light colours. Range from 2200K to 4000K, RGBW and Dim to Warm intensity/colour adjustment. Altopiano downlights offer great visual comfort, with their recessed optics and possibility of building in a honeycomb louvre and anti-glare shield with concentric rings, as well as a UGR 19 with the narrow, medium and wide optics.The body is made of thermally conductive technopolymer (with a thermal conductivity equal to that of stainless steel), giving it outstanding corrosion resistance. IP66.

Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset