logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
PROLICHT
RECESSED LINEAR LIGHT
INDOOR LIGHTING
SIGN TRIMLESS_380

Edgeless luminaire · Photometric cover: Opal (PMMA) · "KORONA FRAME" ·

"MATTER"- Standard · 3-pole terminal block · 240 Volt, 50/60 Hz · Direct light

colors: optionally 3000K or 4000K. · LED board coated with high-reflective material

· MacAdam: 3 · 50,000 hours lifespan · Flicker-free operation with suitable electronic

ballast · Light source can be replaced by professional staff. · IP protection type IP20 ·

Electrical Protection Class 1 · complies with EN 60598-1 · · · · · · · · · · Height: 85 m

Compare
SPARK
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SPK3001-T1-30W-24°

Recessed adjustable type downlight, aluminium housing, different types of beam angle.

Compare
BEGA
RECESSED DOWNLIGHT
OUTDOOR LIGHTING
24 906 K3

PRIMA Recessed ceiling downlight with connecting cable for installation into concrete ceilings or suspended ceilings both indoors and out. With symmetrical wide beam light distribution..Luminaire made of aluminium alloy, aluminium and stainless steel BEGA Unidure® coating technology. Colour graphite or white Clear safety glass. Reflector surface made of pure aluminium. Luminaire housing with 2 fixing claws and guide screws

Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
64633W30

Single emission downlights for indoor application. The warm white LED light source with a medium wide flood light distribution is composed of 1 powerled LEDs with CCT of 3000 K and a CRI 80; the source luminous flux is 490 lm, with a 122.5 lm/W nominal luminous efficacy. The device body is made of plaster and features a white finish; the diffuser is made of polyamide. The ingress protection degree is IP20; the total weight is of 0.25 kg. The power supply driver is not provided and is to be ordered separately. The total absorbed power is 4 W. The power supply cable is included and features a 0.170 m length. The device features protection class III and can be ceiling-mounted, with a 85 x 85 mm hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.

Compare
SIMES
INGROUND LINEAR LIGHT
OUTDOOR LIGHTING
S.5475W.19
"Copper Free" Aluminium extruded EN AW-6060 with high resistance against corrosion, caps in "Copper Free" Aluminium die cast housing in EN AB-44100 with high resistance against corrosion. Stone wash surface treatment prior to painting process. 3 mm thick front trim in Stainless Steel - Grade AISI 316L with 2,5 -3% molybdenum content, with high resistance against corrosion. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process: 3 Step Process 1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09 Maximum load capacity 500 Kg. This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user. This product contains a light source of energy efficiency class: E. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.
Compare
SPARK
TRACKLIGHT
INDOOR LIGHTING
SPK9004-30W-36°
Track Adjustable Spotlight luminaire body made of aluminium housing with white powder coated finish. Black finish and honeycomb accessory available upon request. It come with different types of bean angles.
Compare
XAL
SURFACE MOUNTED DOWNLIGHT
INDOOR LIGHTING
UNICO Q1 BASIC_090-1Q141BW001

Square surface mounted multi-downlight made of aluminium; luminaire housing can be attached to mounting plate without tools by interlock; converter integrated into luminaire housing; surface traffic white powder coated; equipped with a medium round light element; symmetrical light distribution with precise radiation characteristic, beam angle 33°

Compare
LINEALIGHT
SURFACE TRACKLIGHT
INDOOR LIGHTING
82364N15
Single emission projectors for indoor application. The natural white LED light source with a spot light distribution is composed of 1 arrayled LEDs. The device body is made of die-cast aluminium en ab - 46100 and features a embossed black ral 9005 finish, processed by means of powder coating. The ingress protection degree is IP20; the total weight is of 0.920 kg. The device features protection class I and can be ceiling-mounted. Compliant with the EN 60598-1 standard and its specific provisions.
Compare
LIGHTFORMS
SUSPENDED PENDANT LIGHT
INDOOR LIGHTING
LF157043
Big Triplane features three-side illumination from a 108mm lensed channel. Extremely efficient, the white opal, acrylic lens is impact-resistant. Individual or continuous row mounting. Remote driver. Available in suspended and surface models.
Compare
IGUZZINI
SPOTLIGHT
INDOOR LIGHTING
Sipario_40mm_25D

Miniaturised adjustable spotlight for surface mounting with special base. The body is made of painted die-cast aluminium, with a passive dissipation system that ensures optimal thermal management. Rear cap and front ring in thermoplastic material (Mass-Balance). LED source with high colour rendering C.O.B (Chip on board) technology. The joint system allows a 360° rotation and a 90° inclination, offering flexibility in the orientation of the light beam.

Compare
LINEALIGHT
SURFACE TRACKLIGHT
INDOOR LIGHTING
82228W15

Single emission projectors for indoor application. The warm white LED light source with a spot light distribution is composed of 1 arrayled LEDs. The device body is made of die-cast aluminium en ab - 46100 and features a embossed black ral 9005 finish, processed by means of powder coating. The ingress protection degree is IP20; the total weight is of 0.390 kg. The device features protection class II and can be ceiling-mounted. Compliant with the EN 60598-1 standard and its specific provisions.

Compare
SIMES
INGROUND UPLIGHT
OUTDOOR LIGHTING
S.5402W
user 6 mm thick. Electronic driver 220V/240V 50Hz. Stainless steel screws. Luminaire hard wired with single neoprene cable with cable gland. Silicone gaskets. Recessing box in aluminium. Fast connector IP68 included.
Compare
IGUZZINI
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
LASER BLADE XS HIGH CONTRAST

Fixed linear module with 5 optical elements complete with adapter for installation on Superrail LV track. The thermoplastic adapter includes the DC/DC driver circuit with DALI dimmable function. The integrated «Powerline» technology allows each light module inserted on the track to be adjusted independently. Fixed optics with high-definition Opti-Beam reflectors in metallised thermoplastic. Despite the minimum dimensions of the product, the patented technology of the optical system guarantees an

Compare
SIMES
SPOTLIGHT
OUTDOOR LIGHTING
FLOWER ZOOM 60_S.1660W
Outdoor surface mount spike pole luminaire made of aluminium die cast housing in EN AB-44100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. 2 mm thick front trim in Stainless Steel - Grade AISI 316L with 2,5 -3% molybdenum content, with high resistance against corrosion. A4 grade Stainless Steel screws. IP66, IK07.
Compare
TRAXON
LED DOT
OUTDOOR LIGHTING
ALLEGRO DOT M DW_DIFFUSED

Allegro Dot DW is the next generation of intelligent media dot family. It is an extra bright Dynamic White clear or diffused dot. The dots can provide advanced features and flexibility for lighting design and project execution. Customizable pitch containing up to 46 dots max in Dot M and 28 dots max in Dot L. IP66&67. DIMENSIONS: Ø68x60(L)x39(H)mm.

Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset