logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
PLUS LIGHT TECH
RECESSED DOWNLIGHT
INDOOR LIGHTING
PANTO_2700K-57OOK-45°

Luminaire ceiling- recessed Downlight that highlight the desired subject or place and provide optimum illumination by being nondescript. The simplicity of its form provides smooth integration in architectural features.

Compare
CUSTOMIZED
PANEL LIGHT
INDOOR LIGHTING
DWB606036CS


Compare
SPARK
ZOOMABLE SPOTLIGHT
OUTDOOR LIGHTING
SPK005DC-7W

Outdoor Zoomable Spike light made of die-cast aluminium housing and in powder coated black finish. Silicon rubber gasket and external driver. Suitable for garden, balconies terraces and walkway application. Luminaire come with 3 differents wattage 7W, 12W and 20W upon request.

Compare
XAL
UP/DOWN WALL LIGHT
INDOOR LIGHTING
SASSO 60_048-31605111O

Cylindrical wall surface mounted luminaire made of aluminium; surface jet black powder coated; Inner colour lacquered in jet black; passive cooling of the LEDs through improved heat sink geometry; with COB (Chip on Board) technology for maximum efficiency; no appearance of multiple shadows; light colour 3000 K; ≤ 2 SDCM (initial MacAdam); CRI ≥ 90; min. 80% of luminous flux after 50000 operating hours; energy efficient LEDs with high CRI; incl. high quality lens system.

Compare
FLOS
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
KAP 50 ADJ_ 05.7316.B1

Recessed luminaire with LED light source. Power supply not included. FastPerfect pre-installation frame. To be ordered separately. Remote power supply to be installed in an accessible place. IP20.

Compare
CDN LIGHTING
RECESSED DOWNLIGHT
INDOOR LIGHTING
HS6070R 7W12D


Compare
FORMALIGHTING
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
COLOSSEO 75 ROUND TRIM_RP19BR21-903007D011_7°

Colosseo Round series fully adjustable luminaire designed to accommodate any recessed lighting applications. Round-shaped mounting trim in cast aluminum with spring for trim installation or brackets for trimless installation on a ceiling thickness 6-15mm. Colosseo is available in three sizes with light head diameters of 75mm, 90mm and 120mm, vertical tiltable ±30°. Luminaire body inclusive of snoot-in cast aluminum, Easy relamping via removable front ring by snap-in catch actio.

Compare
SPARK
TRACKLIGHT
INDOOR LIGHTING
T-LINE K2_CTLS-1250-20°x90° (TILTING:0°)

LED Twin Wings Track tilting linear light system can be flexibly combined with track spotlights on the same track rail for general lighting & accent lighting. Ultra slim delicate design and flexible rotation for wall washing. It come in 3-wire, 4-wire and 6-wire surface / suspension track. Various of beam angle available.

Compare
SPARK
SURFACE TRACKLIGHT
INDOOR LIGHTING
SPK9501-6W-50D

Track Adjustable Spotlight luminaire body made of aluminium housing with white powder coated finish. Reflector finish available White, Silver and Black Chrome. Black finish and honeycomb accessory available upon request.

Compare
LINEALIGHT
INGROUND UPLIGHT
OUTDOOR LIGHTING
ORMA_AJ_81205M15

Single emission uplights for outdoor application. The super warm LED light source with a flood light distribution is composed of 1 powerled LEDs. The luminaire body is made of die-cast aluminium en ab - 46100 and features a black finish, processed by means of open pore anodizing + powder coating; the diffuser is made of extra clear glass - tempered. The ingress protection degree is IP68,IK10.

Compare
ARTEMIDE
TRACKLIGHT
INDOOR LIGHTING
FU21104APP
Funivia is a functional network of relationships, material and immaterial, free and inclusive capable of evolving through the cooperation of its elements. It starts from the essential, with a "mountaineer's" spirit it discovers a new level of freedom of light in spaces. A rope, the cable that carries energy, and nails, the fastening elements in space, are the basis for going far, overcoming the limits given by the rigidity of systems. The cable, with a special minimal cross-section but capable of supporting both mechanical and thermal stresses, is the energy distribution channel of the system and the load-bearing element on which the light elements are connected, it runs seamlessly in space transcending the limits of three dimensions. It is attached to the side, floor or ceiling through mechanical elements. It runs inside them without requiring to be cut and thus interrupted, drawing in space a network of regular lines, horizontal or vertical, but also freely inclined. From a single power point it can run indefinitely, the only limit being the power installed on its length. Funivia is not bound to a power grid or a predefined design, it can enter any space at any time and draw light with the utmost freedom, it can generate an extraordinary performance quality even without an ad hoc installation a specific intervention in the space. The light elements hook on the cable thanks to a "bridge" element, a kind of current-stealing lock that mechanically fixes the luminaire and takes energy from the cable. Also in this digital network each luminaire has its own identity, its own IP address, through which it can be managed with Dali systems or with Artemide App It is a sustainable approach at the level of production, distribution, installation, consumption, use, integration of elements that already exist without necessarily calling for the creation of new additional products. Funivia breaks a pattern common to existing lighting systems, breaking out of the rigidity of fixed modules (in space, stock, production).
Compare
LINEALIGHT
INGROUND UPLIGHT
OUTDOOR LIGHTING
SUELO316 RXF_76044W15_7W-16°
Single emission uplights for outdoor application. The warm white LED light source with a spot light distribution is composed of 1 arrayled LEDs. The device luminaire is made of aisi 316l steel and features a steel finish; the diffuser is made of extra clear glass with a silk-screening treatment. The ingress protection degree is IP68, IK10.
Compare
PROLICHT
RECESSED LINEAR LIGHT
INDOOR LIGHTING
IDAHO40_RECESSED

The IDAHO built-in profile system stands for seamless lines of light with a minimalist frame, which can be designed in the PROLICHT colors. To avoid darker spots at the profile joints, overlapping LED boards are used - for uniform light bands on ceilings, walls, corner or intersecting. Spotlight inserts are also available for accent lighting.The multiple feed-ins at different points allow for lines of unlimited length. 


Compare
PROLICHT
SURFACE SPOTLIGHT
INDOOR LIGHTING
IMAGINE MIRCO FLEX 120-0567.03-03-03.27-92-03-74

The versatile mounting types and luminaires of the IMAGINE family offer variable and professional lighting solutions for shops, hotels and restaurants. IMAGINE is flexibly configurable, technically sophisticated and perfect for integrating into any room design. The IMAGINE downlights are available as round recessed versions or as round/square trimless fitting.

Compare
LED LINEAR
INGROUND UPLIGHT
OUTDOOR LIGHTING
Suelo_R_76203W30

Single emission uplights for outdoor application. The warm white LED light source with a flood light distribution is composed of 1 arrayled LEDs with CCT of 3000 K and a CRI 80; the source luminous flux is 1087 lm, with a 135.9 lm/W nominal luminous efficacy.

Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form