logo
Welcome to Blox
Design Better Light, Anywhere
All your lighting ideas, calculations, and planning—on one platform.
Home Products
FLOS
WALL LIGHT
INDOOR LIGHTING
BELLHOP WALL UP_F1080075

 Bellhop Wall Up is a future-proof lamp as no glue is used to assemble its different parts. The product can therefore be separated, replaced individually, and recycled separately. The body made of in colored polycarbonate. Diffuser made of semi-transparent injection-moulded polycarbonate.  The surface of the diffuser has been designed with a special texture to enhance the uniformity of the light distribution

Compare
SPARK
LINEAR DOWNLIGHT
INDOOR LIGHTING
SPK1605-25W-24D

Recessed linear downlight, luminaire body made of aluminium housing with white powder coated trim finish. Reflector available Silver, Black Chrome and White finish. Black finish and honeycomb accessory available upon request.

Compare
IGUZZINI
WALLWASHER
OUTDOOR LIGHTING
LINEALUCE_SE99 .15

Direct light linear luminaire, designed to use LED RGBW lamps. The product can be installed using pairs of arms, ceiling/ground/wall-mounting bases, stakes, and pendant rods and cables (to be ordered separately). The body is made of extruded aluminium and includes die-cast aluminium end caps with 50/60 Shore A silicone seals. It is subjected to a multi-step, pre-treatment process, in which the main phases are degreasing,

Compare
DALITEK
CONTROL SYSTEM
CONTROL SYSTEM
DM802-4

220V ± 10% 50Hz Single phase 20A. Output: 4 channels of 5A output trailing edge phase cut control (not applicable to inductor transformer dimming). Maximum total load: 20A. Control input: 1 × RS485 network serial port input; 1 × AUX dry contact input. Internal control: Build in programmable logic controller. Network DC power: 90mA DC12V. Presets scenes: 96 (no loss of information due to power failure)

Compare
SPARK
ADJUSTABLE DOWNLIGHT
INDOOR LIGHTING
SPK0601-12W-15D

Recessed adjustable square downlight luminaire body made of aluminium housing with white powder coated trim finish. Black finish and honeycomb accessory available upon request.

Compare
ARTEMIDE
WALL LIGHT
OUTDOOR LIGHTING
T42004NW20
Light fixture with 1 light beam using monochromatic LED light source caracterized by warm colour temperature (3000K) together with a light-diffusing lens which optimize the optical performance of the beam and establish its width. Designed to create geometric lights of scenic effect, it has 1 narrow beam of 15°. Wall installation. Composed by lighting cap unit and terminal board fixed together by means of locking dowels. Cap in die-cast EN AB-47100 aluminium. Terminal board in reinforced polymer. Watertight gasket in silicone rubber. Locking dowels used outside the fixture in AISI 316 stainless steel. PMMA lens siliconed flush with the cap to obtain the beam angle opening.
Compare
FLOS
RECESSED LINEAR LIGHT
OUTDOOR LIGHTING
FA94861233-310

LED source included. Integrated power supply 220-240V ON/OFF and dimmable 1-10V or DALI. Adjustment on the vertical axis: max 12°. The necessary junction box or the structure for plasterboard installation need to be ordered separately. With two M20 cable guides (6<ø<12mm cables) for the connection to the watertight electrical module. Extraclear transparent glass.

Compare
ERCO
RECESSED DOWNLIGHT
INDOOR LIGHTING
40010

Housing: cast aluminium, with connec- tion cable L 850mm. 0°-40° tilt, 360° rotation. Lockable angles of tilt and rotation.

Compare
FORMALIGHTING
RECESSED DOWNLIGHT
INDOOR LIGHTING
M570BL23_90FS28DC10

Square recessed motorized luminaire with retractable light head. Mounting trim and light head are made of cast aluminium, recessed light housing made of painted metal. Moto-Palla In&Out is available in 3 different light head diameters: 66mm, 100mm and 130mm. The luminaire includes brackets for trim installation on ceiling thickness max. 25 mm or trimless installation on ceiling thickness max. 30 mm. Two remote controlled DC motors drive the movements of the fixtures. The fixtures are rotatable horizontally 350° and, tiltable vertically in two directions (0°-10° In, 0°-90° Out). The movements of the fixture, as well as the intensity and the colour tuning of the light, are controlled via CASAMBI™ application.

Compare
SPARK
SUSPENDED DOWNLIGHT
INDOOR LIGHTING
SPK5131P-12W-45D

Suspended mount downlight, luminaire body made of aluminium housing with white powder coated finish. Come with 1m hanging rod. Black finish and honeycomb accessory available upon request.

Compare
SPARK
TRACKLIGHT
INDOOR LIGHTING
SPK9004-30W-24°
Track Adjustable Spotlight luminaire body made of aluminium housing with white powder coated finish. Black finish and honeycomb accessory available upon request. It come with different types of bean angles.
Compare
CLEAR LIGHTING
LED NEON TUBE
OUTDOOR LIGHTING
C-SFR-F2222B-HB-24CC-30K-WM-140-80-16.5W-50
FLEXGLO Horizontal Bending silicon neon strip, min bending diameter 400mm. Anti-yellowing and come in Mono CCT, tunable CCT and RGB / RGBW version. Solvents, UV, Flame and Salt water resistant. IK10 Protection.
Compare
SPARK
WALLWASHER
OUTDOOR LIGHTING
SPK_24_3000K-25° X 45°

Wall-washer luminaire series of extremely compact dimensions with integral 24VDC driver . As well as individual luminaires there is also a modular system available for creating continuous lines with barely any shadow between the sections. The very slim cross section allows for discreet installation. The luminaires are available with wall washer optics or in asymmetrical distribution. The ingress protection degree is IP66.

Compare
WIBRE
UNDERWATER LIGHT
OUTDOOR LIGHTING
4.0050.30.12
Despite its small dimensions, the continuously swivelling miniature spotlight for illuminating small and medium-sized fountains and water features produces up to 675 lumens. Its robust stainless steel housing can withstand the effects of water even over many years. Also outside the water, where it can conjure up lighting effects on objects, the smallest spotlight in the Centum series offers limitless design possibilities with static or dynamic white light or with coloured light (RGB-W).
Compare
SPARK
RECESSED DOWNLIGHT
INDOOR LIGHTING
SPK8243_36D
Recessed mini downlight made of aluminium housing. Cut-out size Ø35mm, suitable for display showcase, shelf and cabinet application.
Compare

Products

Welcome to Blox

Design Better Light, Anywhere

The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.

Learn More
The new way of providing valuable solutions from design, creating plan, finding references, lighting layout, and showing portfolio.
Newsletter Subscribe

Use the same signup form as in the site footer.

Open newsletter form

Recent News

Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Jul 23, 2026
Preview Real Lighting Products in Blox 3D Simulator Using IES Files
Mapping Color Temperature and Surfaces in Browser-Based Design
May 29, 2026
Mapping Color Temperature and Surfaces in Browser-Based Design
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset
May 05, 2026
The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset