Product Detail | Bloxlimited

ERCO

WALLWASHER

INDOOR LIGHTING

LIGHTGAP_18W

Lightgap emphasises the tactile qualities of architectural materials by making even the finest structures of wood, concrete and rough surfaces such as natural stone clearly visible. This creates high contrast, structurally appealing

effects with light and shadow. Lightgap generates an extremely uniform beam even when positioned up to 10cm in front of the wall. The light can be comfortably tilted in both directions up to an inclination angle of 10°. Lightgap thus offers striking texture effects and is also ideal for efficient room lighting, for example in restaurants and hotels. IP20

Specification

Power

18W/M

Color Temperature

3500K

Light Source Type

LED

Lumen Output

2475LM/M

Finishing

BLACK

IP Rating

IP20

Color Rendering

CRI 92

Driver

DALI Driver

NEKO

RECESSED DOWNLIGHT

INDOOR LIGHTING

Round recessed downlight made of die-cast aluminium with white powder-coating finish (RAL 9016) and white reflector; ON-OFF Driver; System Power 13W; measurement Ø85mm; ceiling cutout of Ø75mm with a narrow mounting trim; luminaire's weight is approximately 220g; CCT 3000K with a System luminous flux of 550lm; high color rendering at an index of CRI90; after a lifetime of 50000h min. 80% of the luminous flux with energy efficient CITIZEN LED Chips; 5 years warranty; lighting perfectly suitable for reading, writing as well as computer and control work with UGR<19; degree of housing protection IP44 (LED Module IP54) on the visible part of the product once installed; light source replaceable by a qualified electrician; driver replaceable by a qualified electrician

LIGHTFORMS

WALL LIGHT

INDOOR LIGHTING

Draco is the tallest member of our cylinder lighting family. Its strong long form utilises LEDil reflectors and Osram chips (with 1 and 2 Macadam's Ellipses colour consistency). Draco is available is in a full range colour temperatures and with integral control gear as standard.

LINEALIGHT

WALLWASHER

OUTDOOR LIGHTING

Single emission lines for outdoor application. The warm white LED light source with a flood light distribution is composed of 9 powerled LEDs. The device body is made of aluminium 6060 and features a anodised black finish, processed by means of 15 µm anodizing; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The ingress protection degree is IP67; the total weight is of 2.8 kg. The power supply cable is included and features a 0.2 m length. The device features protection class I and can be floor-mounted with an outer casing, code 98672 (for concrete or masonry). Compliant with the EN 60598-1 standard and its specific provisions.

BEGA

BOLLARD

OUTDOOR LIGHTING

Efficient and cost-effective LED bollards for the illumination of ground surfaces. These luminaires are characterised by high luminous efficiency and great uniformity of illuminance. We can supply these luminaires in three sizes for the differing dimensions of the installation site. Their sturdy construction makes them especially suitable for areas in which considerable robustness is required.

May 05, 2026

The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset

ERCO

Specification

See more

Design Better Light, Anywhere

Recent News

ERCO

Specification

See more

Design Better Light, Anywhere

Newsletter Subscribe

Recent News