Product Detail | Bloxlimited

SIMES

INGROUND UPLIGHT

OUTDOOR LIGHTING

S.3364W.19

Body made of AISI 316L monoblock stainless steel. Absence of screws (the luminaire is fixed to the recessing box with OR rings). Recessing box in polypropylene. Mechanical resistance of diffusor IK 08 Maximum load capacity 500 Kg. This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user. This product contains a light source of energy efficiency class: F. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

Specification

Power

0.8W

Color Temperature

3000K

Light Source Type

LED

Lumen Output

61LM

Finishing

STAINLESS STEEL

IP Rating

IP67

Color Rendering

CRI 90

Driver

ON/OFF DRIVER

BEGA

WALL LIGHT

OUTDOOR LIGHTING

Non-shielded wall luminaire with mouth-blown opal glass for a soft and uniform light distribution. Wall luminaire whose elongated design makes it particularly suitable for mounting on pillars, columns and for the front surface of walls, as well as for local cavities or profiles. The luminaire can be installed horizontally or vertically. Luminaire made of aluminium alloy, aluminium and stainless steel. IP65,IK03.

ARTEMIDE

WALL LIGHT

OUTDOOR LIGHTING

Light fixture with 1 light beam using monochromatic LED light source caracterized by warm colour temperature (3000K) together with a light-diffusing lens which optimize the optical performance of the beam and establish its width. Designed to create geometric lights of scenic effect, it has 1 narrow beam of 15°. Wall installation. Composed by lighting cap unit and terminal board fixed together by means of locking dowels. Cap in die-cast EN AB-47100 aluminium. Terminal board in reinforced polymer. Watertight gasket in silicone rubber. Locking dowels used outside the fixture in AISI 316 stainless steel. PMMA lens siliconed flush with the cap to obtain the beam angle opening.

LINEALIGHT

RECESSED DOWNLIGHT

INDOOR LIGHTING

Single emission downlights for indoor application. The warm white LED light source with a medium wide flood light distribution is composed of 1 powerled LEDs with CCT of 3000 K and a CRI 80; the source luminous flux is 490 lm, with a 122.5 lm/W nominal luminous efficacy. The device body is made of plaster and features a white finish; the diffuser is made of polyamide. The ingress protection degree is IP20; the total weight is of 0.25 kg. The power supply driver is not provided and is to be ordered separately. The total absorbed power is 4 W. The power supply cable is included and features a 0.170 m length. The device features protection class III and can be ceiling-mounted, with a 85 x 85 mm hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.

PROLICHT

WALL LIGHT

INDOOR LIGHTING

The surface luminaire INVADER WALL from the familiy INVADER consists of aluminum. With 3 powder coated options 15625 colour combinations can be achieved. The ballast is integrated and allows for an operation with 220-240V (50/60Hz). INVADER WALL (# 320-0192) is dimmable via BUS. The spot with direct and indirect illumination corresponds to protection class SK1 at IP20.

May 05, 2026

The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset

SIMES

Specification

See more

Design Better Light, Anywhere

Recent News

SIMES

Specification

See more

Design Better Light, Anywhere

Newsletter Subscribe

Recent News