Product Detail | Bloxlimited

PLATEK

INGROUND UPLIGHT

OUTDOOR LIGHTING

MEDIO STS 8483311

Outdoor inground uplight body and front locking trim made of AISI 316L stainless steel. IP68 Degree of protection with Full Dry system which avoids condensation inside the product. The Installation of the recessed housing in cast concrete with a 20-30 cm gravel soak away. Only an IP68 connection to the power supply can guarantee the same protection to the fixture. IK10

Specification

Power

21W

Color Temperature

3000K

Light Source Type

LED

Lumen Output

2560LM

Finishing

316 STAINLESS STEEL

IP Rating

IP68

Color Rendering

CRI80

Driver

DALI DRIVER

XAL

SUSPENDED LINEAR LIGHT

INDOOR LIGHTING

Suspended luminaire housing made of extruded aluminium profile; light tight final end caps made of aluminium; no visible screws; angular design; surface jet black powder coated; Luminaire come with 1.5m cable suspension with integrated toolless suspension height adjustment on the luminaire; spring clip attachment to the luminaire; freely positionable.

DIMENSION : L880*W60*H80MM

APEX

WALLWASHER

INDOOR LIGHTING

APEX WALL WASHER linear light, fixture dimension (H)18mm x (W)15.5mm x (L)1000mm. 80LEDs/M <3SCDM. CCT available from 2300K to 6000K. IP20

NEKO

RECESSED DOWNLIGHT

INDOOR LIGHTING

Round recessed downlight made of die-cast aluminium with white powder-coating finish (RAL 9016) and white reflector; ON-OFF Driver; LED 11W; measurement Ø85mm; ceiling cutout of Ø75mm with a narrow mounting trim; luminaire's weight is approximately 240g; CCT 3000K with an LED Output of 1100lm; high color rendering at an index of CRI90; after a lifetime of 50000h min. 80% of the luminous flux with energy efficient CITIZEN LED Chips; 5 years warranty; lighting perfectly suitable for reading, writing as well as computer and control work according to DIN EN 12464-1 (UGR<19); degree of housing protection IP20 (LED Module IP54)

XAL

SURFACE MOUNTED DOWNLIGHT

INDOOR LIGHTING

Square semi-recessed spotlight made of aluminium; surface black/gold (housing/light inset); luminaire housing can be attached to mounting plate without tools by interlock; passive cooling of the LEDs through improved heat sink geometry; with COB (Chip on Board) technology for maximum efficiency; no appearance of multiple shadows

May 05, 2026

The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset

PLATEK

Specification

See more

Design Better Light, Anywhere

Recent News

PLATEK

Specification

See more

Design Better Light, Anywhere

Newsletter Subscribe

Recent News