Product Detail | Bloxlimited

CLEAR LIGHTING

LED STRIP

INDOOR LIGHTING

C-SFR-F16B-VB-24CC-R-WT-36-4W-250

FLEXGLO F16 Vertical Bending silicon LED strip, min bending diameter 50mm. Anti-yellowing and come in Mono CCT, tunable CCT and RGB / RGBW version. Solvents, UV, Flame and Salt water resistant. IK08 Protection.

Specification

Power

4W/M

Color Temperature

RED

Light Source Type

LED

Lumen Output

160LM/M

Finishing

WHITE

IP Rating

IP67

Color Rendering

>90

Driver

0-10V DRIVER

LINEALIGHT

RECESSED DOWNLIGHT

INDOOR LIGHTING

Single emission downlights for indoor application. The warm white LED light source with a medium flood light distribution is composed of 1 powerled LEDs. The device body is made of die-cast aluminium en ab - 46100 and features a embossed black ral 9005 finish, processed by means of powder coating; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP44; the total weight is of 0.250 kg. The power supply driver is not provided and is to be ordered separately. The device features protection class III and can be ceiling-mounted, with a 64 mm diameter hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.

IGUZZINI

WALLWASHER

OUTDOOR LIGHTING

Direct light linear luminaire, designed to use Tunable LED lamps. The product can be installed using pairs of arms, ceiling/ground/wall-mounting bases, stakes, and pendant rods and cables (to be ordered separately). The luminaire is made of extruded aluminium and includes die-cast aluminium end caps with 50/60 Shore. A silicone seals. IP66,IK06.

TARGETTI

RECESSED DOWNLIGHT

INDOOR LIGHTING

Black painted die cast aluminium body and heat sink. Paaive dissipation system

FAGERHULT

RECESSED SPOTLIGHT

INDOOR LIGHTING

Installation Recessed installation in suspended ceilings. Unventilated or ventilated ceilings.

For installation in suspended ceilings with visible T-bars, VTB (24 mm) or one-piece suspended

ceilings.

Connection For permanent connection with 230 V; built-in LED ballast in luminaire. Single

and Start luminaires in systems are equipped with 2.5 m connection cable 5 x 0.75 mm².

System units are equipped with a change-over cable (5 x 1.5 mm²) and a quick-connector

between the luminaire units. Use Con

May 05, 2026

The Invisible Architecture: Why Web-Based Lighting Calculation is the Modern Designer’s Greatest Asset

CLEAR LIGHTING

Specification

See more

Design Better Light, Anywhere

Recent News

CLEAR LIGHTING

Specification

See more

Design Better Light, Anywhere

Newsletter Subscribe

Recent News